DROSS INHIBITORS

SUPER DEOX #1 (Dross Eliminator for Leaded Pots)super_deox

Qualitek Super Deox #1 has been specifically formulated to convert oxides of powder (dross) into good solder.  Super Deox #1 is a stable, low foaming compound with no flash point.  It has been shown that Super Deox can reclaim over 80% dross into usable solder that significantly reduces cost.
| TDS SD#1 | SDS SD#1 |

SUPER DEOX #1H (Dross Eliminator for Lead-Free Pots)

Qualitek has developed Super Deox #1H to convert oxides of powder (dross) into good solder for lead-free solder pots.  Super Deox #1H, like Super Deox #1, is a stable, low foaming compound with no flash point so it may be used at the higher temperatures required for lead-free pots. Super Deox #1H will not break down even at elevated temperatures.
| TDS SD#1H | SDS SD#1H |

Super Deox #1 and #1H Packaging Options:

1 lb., 10 lb., 25 lb. or 50 lb. containers

WAVE OIL 2020 (WATER SOLUBLE)

Wave Oil 2020 is a water soluble, highly refined synthetic oil that contains an effective dross inhibiting agent that reduces dross build-up in the solder pot.  Wave Oil 2020 is compatible with rosin-based fluxes and all types of organic acid fluxes.  Wave Oil 2020 is compatible with both leaded and lead-free solder systems.
| TDS 2020 | SDS 2020 |

Wave Oil 2020 Packaging Options:

1 gallon, 5 gallon or 55 gallon containers

TEMPORARY SOLDER  MASK
ceasolder
CEASOLDER (PEELABLE RUBBER LATEX SOLDER MASK)

Ceasolder is a high temperature-resistant rubber latex used to temporarily mask metal surfaces from molten solder during wave soldering process.  Ceasolder may be applied directly from the applicator bottle or dispensed using a pneumatic dispenser.
| TDS Ceasolder | SDS Ceasolder |

Ceasolder Packaging Options:

12 oz. bottles or 1 gallon containers


rework_wndREWORK WANDS

Rework Wands are flux filled applicator pens designed for to assist with hand-soldering rework applications.

Types:
No-Clean
 | TDS NC-RW | SDS NC-RW |

Water-Soluble | TDS WS-RW | SDS WS-RW |

RMA | TDS RMA-RW | SDS RMA-RW |
NC Low Temperature | TDS NCLT-RW | SDS NCLT-RW |

Rework Wands Packaging Options:

Rework Wands are sold in boxes of 25 each.

Click To Specialty Products TDS & SDS